NAD C326BEE 엠프

나드(NAD)

1972년, NAD가 시작하게 된 그 당시 오디오 산업은 1950년대 배경의 고객들을 기반으로 형성되었습니다. 라디오, LP 보다 좀 더 나은 것을 원했던 사람들은 PA(public address) 기기들을 찾아 다녔고, 그들이 할 수 있는 최선의 방법을 사용했습니다. 그리고 이들 중 어떤 이들은 이들이 찾지 못한 시장에 뛰어 들었습니다. 1960년대 이 때 당시는 변혁의 시기로, 좋은 기기에 대한 이런 관심은 전자 산업이 사업의 결실을 걷어 들이기 위해 손을 서서히 댈 정도로 분명해져 갔습니다. 오디오 기기 시장은 찾고, 즐기기 어려울 정도로 그 인기가 폭발적이었습니다.

모든 가정용 오디오 기기의 목적은 분명히 즐거움에 있습니다. 오디오 컴포넌트를 사는 하나의 즐거움은 '이들의 사운드가 얼마나 살아 숨쉬는가'를 결정하는데 있습니다. NAD 또한 모든 이들처럼 이런 즐거움을 즐깁니다, 하지만 즐거움에 대한 본래의 원칙은 절대로 잊지 않습니다. NAD는 이런 즐거움을 만드는 데에는 성능(Performance), 가치(Value), 그리고 단순함(Simplicity)이 제일 중요하다고 생각합니다.

 

NAD C 326BEE Stereo Integrated Amplifier

The NAD C 320 series of amplifiers have always punched far above their modest weight. Combining the highest levels of audio engineering with an extensive feature list, and more than adequate power for all but the most ambitious systems, the C 326BEE keeps the concept of affordable hi-end alive and well. With the very high dynamic power and low impedance drive capability of NAD’s proprietary PowerDrive™ circuit, the C 326BEE is able to accurately control even difficult to drive loudspeakers while sounding musical, detailed, coherent and relaxed.
 

The C 326BEE is the latest in NAD’s range of affordably priced, yet very high performance Stereo Integrated Amplifiers. Neatly slotted in between our most affordable C 315BEE and more powerful C 355BEE, the C 326BEE boasts many upgrades and refinements taken directly from the highly acclaimed NAD Masters Series M3 Amplifier. These include application of Bjorn Erik Edvardsen’s innovative and patented Distortion Canceling Circuit in the output stage and BEE Clamp in the power supply. An improved tone control circuit and revised PCB layout has reduced distortion and noise to unprecedented levels. Taken together, these improvements mark a sharp upturn in performance that must be heard to be fully appreciated!
 

• 50W x 2 Continuous Power into 4 ohms and 8 ohms
   
• 100W, 150W, 200W IHF Dynamic power into 8, 4 and 2 ohms, respectively
   
• PowerDrive™ circuit
   
• NAD SR 8 Full System Remote control
   
• Headphone socket
   
• Front panel Media Player (MP) input for attaching portable MP3 Player
   
• Relay Input Switching
   
• Holmgren Toroidal Power transformer
   
• 7 Line inputs, including one tape in/out
   
• All discrete circuitry Short signal path from input to output
   
• All sockets Gold plated
   
• Tone controls defeat switch
   
• Main-amp input & pre-amp outputs
   
• Subwoofer (mono) Out
   
• Soft Clipping™
   
• IR Input/Output
   
• 12 volt trigger out
   
• Detachable IEC Power Cable
   
• ＜1W Standby Power Consumption
   
• Free of lead and other environmentally dangerous substances
  

  Features

  The C 326BEE is fully remote controlled and comes supplied with the NAD SR 8 system remote control. The remote control features an ergonomic form, with large buttons that are differentiated by shape and position, to make operation intuitive and enjoyable. The SR 8 will also operate many other NAD products such as CD players, tuners, etc. Flexibility is another NAD strong point. The C 326BEE has 7 line inputs and the pre-amplifier section can be separated from the power amplifier for easy upgrades or adding ancillary equipment. Thus the C 326BEE can be expanded to meet future system needs.
   

  The C 326BEE sports a pre-amp output: Many systems benefit from the use of multiple power amplifiers for “Bi-Amping” (using separate power amplifiers to drive the bass and treble section of a loudspeaker). Additionally, there are two monophonic Subwoofer OUT that can be connected to powered subwoofers - an increasingly popular option.
   

  For remote on/off switching of ancillary components in a system, such as power amplifiers or active speakers, the C 326BEE is equipped with a 12V-trigger system. When switching the amplifier on, the 12V-trigger output is also activated which in turn can activate a 12V-trigger input switching on the remote devices. Besides the 12V-trigger, the C 326BEE also has rear panel IR IN and OUT.
   

  It is fashionable to omit tone controls nowadays: However, provided that the tone controls are properly designed, they can be really useful tools in making improvements to the overall sound. The C 326BEE tone controls only work at the frequency extremes leaving the critical mid-band essentially unaltered. The tone control circuits can be completely bypassed by using the Tone Defeat control button. The C 326BEE also incorporates NAD’s acclaimed switchable “Soft Clipping” circuit, which significantly reduces the risk of damage to loudspeakers due to prolonged high power operation.
   

  Design: PowerDrive™

  The C 326BEE also benefits from NAD’s proprietary PowerDrive circuit topology, now well established and used throughout the NAD product range. The PowerDrive topology allows the C 326BEE to deliver maximum performance under virtually any circumstance, independent of the loudspeakers it is driving. The circuitry automatically senses the impedance characteristics of the loudspeaker and will then adjust its power supply settings to best cope with that specific load. PowerDrive topology is a practical approach to enable an amplifier to easily deal with musical dynamics and difficult speaker loads. Thus we have the highly desirable characteristics of high dynamic power and low impedance drive capability in one affordable package.
   

  The C 326BEE has the lowest levels of distortion and noise available in its price class and is easily capable of embarrassing far more expensive products. To prove it, NAD uses Full Disclosure Power (FDP) - the most demanding criteria for performance measurement. FDP specifies distortion under the most extreme conditions of low impedance loads and frequency extremes rather than the simple and easy 1kHz @ 8 Ohms test quoted by many of our competitors. We use this stricter performance criterion because it more closely matches the demands of real music and real loudspeakers. Maintaining specified distortion at 4 Ohms and at 20Hz and 20kHz is several orders of magnitude more difficult to achieve than the simple 8 Ohms and 1kHz test.
   

  NAD also takes a stand against the meaningless “brochure power” touted by many of our competitors by offering Full Disclosure power specs. We specify minimum continuous power, across the entire audible range of frequencies, at rated distortion, for both 8 and 4 Ohms with all channels driven simultaneously. Perhaps even more importantly, we also specify Dynamic Power at 8, 4, and even 2 Ohms, which better describes the way the amplifier will perform in the real world, with musical signals and reactive loudspeaker loads.
   

  Less Distortion = More Music

  Noise and distortion mask the fine details of a musical recording robbing musical texture and dimension and replacing them with non-musical artifacts. NAD has spent the last 35 years perfecting our designs to have the lowest distortion and highest power in its price class. This cannot be overstated! Our competitors often rate distortion at only 80% of rated power, and even then can’t match our very conservative spec of 0.009% at any frequency within the range of human hearing. Our noise spec is often 10dB (100 times!) less than that of competing amplifiers. This is far from a trivial difference as fine detail and nuance (micro dynamics) are often obscured by noise in lesser amplifiers, robbing a performance of that illusive sense of ‘realism’. It is that exciting feeling of being there at the live performance.
   

  But even the most carefully reported specs cannot fully describe the sonic performance of an amplifier. Only your own ears can finally judge our achievement. We urge you to listen and compare NAD to other products in its price range, and even higher. We don’t think you’ll find anything that comes close to offering the C 326BEE’s overall musical satisfaction, well-rounded performance, and stellar value for money.
   

  Line Level Inputs (CD, Video, Tuner, Tape1, Tape2, Aux)
  Input impedance (R and C)		100kΩ+ 320pF
  Input sensitivity ref. 0.5V		159mV (ref. 500mV out)
  Signal/Noise ratio, A weighted ref 0.5V		>100dB (A-weighted, ref. 500mV)
  Frequency response (-3dB 3Hz - 70kHz)		0.1dB (ref. 20Hz - 20kHz, Tone defeat ON)
  Voltage gain (max volume)		29dB
  THD		>0.004% (ref. 20Hz 20kHz)
  Controls (Volume Setting @ 12:00 position)
  Treble		± 5dB at 10kHz
  Bass		± 8dB at 100Hz
  Power Amp
  Continuous average power output into 8ohms		>50W (ref. rated THD, 20Hz-20kHz, both channels driven)
  Rated distortion (THD 20Hz-20kHz)		<0.009% (ref. 20Hz - 20kHz)
  Clipping power (max cont. power/channel)		>65W (ref. 1kHz 1% THD)
  IHF dynamic power	8 ohms	100W
  	4 ohms	150W
  	2 ohms	200W
  Damping factor		>100 (ref. 8Ω, 50Hz and 1kHz)
  Frequency response	20Hz-20kHz	± 0.1dB (ref. 20Hz - 20kHz)
  	3Hz/70kHz	3Hz 70kHz (ref. -3dB)
  Input impedance R and C		20kΩ + 1nF
  Input sensitivity (for rated output into 8 ohms)		630mV (ref. rated power)
  Voltage gain		29dB
  Signal to noise ratio, A-weighted	ref. 1W	>100dB (A-weighted, ref. 1W)
  	ref. rated power	>117dB (A-weighted, ref. 150W)
  Physical Specification
  Dimensions (W×H×D)	Imperial	17 1/8” x 4” x 11 1/4”
  	Metric	435 x 100 x 286mm
  Gross Dimensions (W×H×D)	Imperial	17 1/8” x 12 1/2” x 13”
  	Metric	435 x 116 x 332mm
  Net Weight	Imperial	6.9 kg
  	Metric	15.21 lbs
  Shipping Weight	Imperial	9.1 kg
  	Metric	20 lbs